Does anyone have or know where I can get a piece of Palo Escrito of size to make a Bridge? I need it ASAP. Any help is much appreciated!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| I need a Piece of Palo Escrito...HELP! http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2562 |
Page 1 of 1 |
| Author: | Dave-SKG [ Fri Jul 22, 2005 10:05 am ] |
| Post subject: | |
Does anyone have or know where I can get a piece of Palo Escrito of size to make a Bridge? I need it ASAP. Any help is much appreciated!
|
|
| Author: | Terry Stowell [ Fri Jul 22, 2005 11:30 am ] |
| Post subject: | |
I'd be interested in knowing your thoughts on PE tonewood. I've got two sister sets, but haven't built with it yet. (I think I'm a lttle allergic to it too...) |
|
| Author: | Ron Shriver [ Fri Jul 22, 2005 11:40 am ] |
| Post subject: | |
I don't have in PE large enough for a bridge, but have used it for back and sides and really, really like it. |
|
| Author: | Don A [ Fri Jul 22, 2005 11:55 am ] |
| Post subject: | |
Dave, I was going to suggest you try lumberlady.com but the link is not working. Do you have any cutoff pieces? You could do a Palo Escrito laminate into another bridge just to get the appearance you want. Check with BobC as I believe he has made bridges like this in the past. Good luck! |
|
| Author: | Dave-SKG [ Sat Jul 23, 2005 1:53 am ] |
| Post subject: | |
I've checked with my Goomps and he refuses to help! Just kidding...he doesn't have any. LMI only sets. I will try Lumber Lady and perhaps others - Google. Thanks to all for your response. I do have some scrap but I wanted to make the bridge from a solid piece. 
|
|
| Author: | Dave-SKG [ Sat Jul 23, 2005 1:54 am ] |
| Post subject: | |
p.s. I've built three guitars out of Palo and like it alot it's one of my fsvorites. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|